You must understand the nine points of carpentry acceptance points
Xiao Bian reminds the owners of the details of the woodworking details of the home improvement project, so after the completion of the woodwork must be a comprehensive acceptance, the following are some acceptance techniques and standards for your reference.
Woodworking acceptance points:
 1. Gap; wooden sealing line, corner line, waist line panel, nozzle seam no more than 0.2mm , line and line clip corner joint not exceeding 0.3mm , veneer and board mouth not exceeding 0.2mm , sliding door full face error Does not exceed 0.3mm .
 2 , structure; check whether the structure is straight. Whether horizontal or vertical, the correct woodworking practice should be straight.
 3 , corner; see if the corner is accurate. Normal corners are all 90 degrees, with the exception of special design factors.
  4 , parquet; check whether the mosaic is strict and accurate. Proper wooden parquet, to be seamless or to maintain a uniform separation distance.
 5 , modeling; check whether the curvature and roundness are smooth and smooth. In addition to a single, multiple identical shapes also ensure consistent shape. The surface of the woodworking project should be level and free of drums or breaks. Symmetrical woodworking projects should be symmetrical.
 6. Cabinet door; try to check if the cabinet door switch is normal. When the door is opened, it should be light and free of noise.
7. Nail holes; nails used in the ceiling structure need to be coated with rust paint on the nail holes.
 8 , leveling; should ensure that the surface of the woodworking project is flat, no drums or broken.
  9. Symmetry; whether the symmetry woodworking project is symmetrical.
Tags: veneer, wood-based panels, panels , top ten brands of Chinese plates , blockboard
Cartwheel Mat Pad,Fitness Floor Gym Mats,Folding Gymnastics Mat,Tumbling Handstand Mat
Shaoxing geili sports and leisure goods Co.,Ltd , https://www.geilisports.com