A summary of how Word and EXCEL files import problems (below)

7.How to use wordform and chart in pagemaker?
The first method: If you do not need to modify the word file directly out of print it.
There is a word file into a pdf file, and then placed into the pagemaker or ai use, but I do not know if the text moves or garbled.
The second method: I have encountered similar problems. I just went through the above and found that some forms won't be implanted.
Later, I copied the form to be ranked in the word inside, and then to the PM inside select special paste, select the first word file, actually put the form glued! And double-click on the attached table image can also return to the word inside editing.

8.word how to print a mirrored pdf?
The first method: first set up the option of a virtual Postscript printer, output as a mirror, and then print it to a .ps file via a Postscript printer, or print it to a .prn file and change the suffix to .ps, and then convert it to a PDF file via Distiller. Yes.

9.word how to make imposition?
The first method: WORD can not be directly imposed, you need to print to the PDF file and then fight, if it is black and white, then you can also a single page out of the film, the final manual imposition can also be.

10. How can the scanned text content be transferred to word for editing?
The first method: install an OCR character recognition software, OCR, OCR.

11. From CC Word multi-page text, paste in the CD can only paste the text of the home page? What is the reason?
The first method: It is paging problem, use [Paste], paste as [text].

12. Why can't the picture inserted when word and publisher typeset fill the entire sheet?
The first method is the problem of printers. It is not possible for the printer to fill a full sheet of paper. Find a printer with borderless printing or print A3 with an A3 machine and then cut it into A4.

13. How to extract the word in the picture?
The first method: After printing to PDF, output the picture in AB.

14. How to insert CAD in WORD?
The first method: You first open the CAD, output it, and then insert the figure in Word. If it is a three-dimensional figure, you generally need to use the Hide command to mask it before output.

15. Word format converted to vector (prepress typesetting)?
good idea!
The first kind of good method: because of doing typesetting, doing the form becomes a pain in the heart, too much trouble (with FH, CD, PS), there are some customers to take some WORD form to let you print, rearrange it, too ...
That is to open the WORD, select the form, copy and open the CD, paste, came in, some friends have said, so everyone knows, it is very inconvenient to edit, do not worry there is the next step.

Then export it to AI format,
If you typeset with a CD, import it again. If you typeset with FH, you have to import it.
After importing, I don't need to say it.
Note: When using WORD as a form, be sure not to exceed the margins. Otherwise, there will be trouble.
By the way, using PS typesetting, then you use the CD to export EPS format, open directly on the PS.
The second good method: there are many ways to convert Word format to vector, I have used it.
There is also a textual turn of the CD. In general, what everyone says most is to use lenses and freeze.
In fact, there is another way that I have seen the best way to solve the above two problems. Recommend to everyone here.

In XP, select Add Printer, select the local printer, print port LPT1, in short, always press "Next" here, and then select the manufacturer Linotronic, the printer model is Linotronic 530-RIP 30 v52.3 (if 98, without this The model of the printer, choose Linotronic 530 52.3 This is the same). The installation of the printer is complete.

Then do a form or article in Word, choose to print, of course, the printer just picked this Linotronic 530-RIP 30 v52.3 on the line, it will prompt you to "print to file", let you enter the file name. Feel free to use a file name. The default extension of this file is prn.

Well, open CD9, create a new file, select import, import the prn file you just saved, and press the default value on the line (choose "curve", don't select "text"), and import the file. problem solved. If this Word document is multi-page, we will see that after importing the CD, a lot of pages are generated, and each page is exactly the same as the content of Word.
Source: China Photoshop Association