Sand dust test chamber for environmental detection interruption treatment

During the environmental test, during the test, the sand dust test box may be in operation during the operation due to unforeseen reasons such as power failure, operation error, etc.

Interruption test, how to deal with test interruption without affecting the reliability and authenticity of the test results. Here, Beijing Yashilin Commissioning Department teaches you how to deal with sand dust.

The test box is used to test the interruption of the test during the test.
The sand dust test chamber test is interrupted, please proceed as follows:
I. Interrupts within tolerances When the test conditions during the interruption do not exceed the allowable error range, the interruption time shall be part of the total test duration.
2. Under-test condition interruption When the test condition is lower than the lower limit of the allowable error, the pre-specified test conditions shall be re-reached from the point below the test condition, and the test shall be resumed.

Go to the completion of the scheduled test cycle.
III. Interruption of test conditions When excessive test conditions occur, it is best to stop the test and redo with the new test sample. If the test conditions do not directly affect the test

If the sample characteristics are damaged, or if the test sample can be repaired, it can be treated as two. If the test sample fails in the future test, this should be considered

The test results are invalid.
Equipment manufacturer: Beijing Yashilin Testing Equipment Co., Ltd. Factory Address: No. 2, Jinfu Road, Daxing Economic Development Zone, Beijing

Aluminium Die-Casting Sauce Pan

Aluminium Die-Casting Sauce Pan,Colorful Diecast Aluminum Sauce Pan,Coating Diecast Sauce Pan,Cast Aluminum Pan

HOMEARTS INDUSTRIAL CO.,LTD , https://www.kitchenworks.cc