The anaerobic incubator should be placed in a position with a small temperature difference
How to properly install the anaerobic incubator:
1. The anaerobic incubator should be placed in a position with small temperature difference and convenient operation. Avoid direct sunlight and away from heating equipment, and place it smoothly;
2. Place the gas cylinder and nitrogen bottle in a stable position, and install the pressure reducing valve (including pressure gauge) separately and place it in the proper position;
3. Connect the gas path and check the gas path. In order to prevent air leakage, if necessary, seal the glue at each joint;
Use (a) operating room anaerobic environment formation:
1. Place the necessary accessories and utensils according to the requirements of use, and put two non-toxic plastic bags into the operation room;
2. Turn on the light through the power supply, turn on the temperature controller, adjust the required temperature and safe temperature;
3. Place 1000g palladium pellets (closed) and 500g desiccant in the operating room and put in the Meilan indicator (closed);
4. Close the sampling indoor and outdoor doors and vacuum check;
5. The first replacement in the operating room (nitrogen replacement):
A. First insert the rubber inlet into the air inlet of the operation room and insert the other end into the plastic bag;
B. Turn on the nitrogen inlet, open the nitrogen control valve 1, make the two plastic bags full of nitrogen, close the valve 1, and then tighten the bag mouth;
C. Put the latex gloves on the flange of the observation plate and tighten them;
Shanghai Xinzhuang Instrument Co., Ltd. has an industry-recognized team of experts and first-class technology talents. With a deep understanding and mastery of scientific instrument technology, we operate a variety of freeze dryers and provide you with perfect pre-sales and sales. And after-sales service, professional technical advice and other services, Shanghai Xinzhuang look forward to your consultation and purchase!
Catch a dozen mice at a time and requires no batteries or maintenance. Position the Three Door Hexagonal Mousetrap in known mouse activity areas and curious mice will enter the one-way trap and hold them inside the three door hexagonal mousetrap.
Three door hexagonal mousetrap is designed to fit perfectly in the corner of almost any room at home, warehouse, shop, in and outdoors. After catch, you can release the mice or dispose of them.
This three door hexagonal mousetrap is preferred by professional pest control operators and homeowners everywhere for its professional grade make and design.
Clear see through cover provides fast inspection.
Bait needed and Rat Trap is reusable.
Warm tips: After catching mouse successfully, the three door hexagonal mousetrap will be stained by dangerous signal that the captured mouse left to other mouses (irritating odoor), therefore in order to maximize it`s effect, recommended to wash it with 60 degrees hot water to remove the odoor.
Special feature:
The product has three entrances and individual bait boxes, increase more catching chance
Galvanized steel material, not easy to get rusty
11cm large entrance makes the mousetrap can catch both big and small mouse
Bedroom, kitchen, basement and outdoor places
Three Door Hexagonal Mousetrap
Three Door Hexagonal Mousetrap,Mouse Trap Cage,Snap Traps,Plastic Mouse Traps
Jiangmen Kuaibu Manufacturing Co.,Ltd , https://www.kuaibuhardware.com