Tips for picking squid in fish ponds in spring

When the squid was released at the beginning of spring, the water in the fish pond was still very cool. The fish had very weak activities and openings. However, as long as you have good skills, you will surely have a good harvest.

First the choice of fishing position. In general, squid is afraid of light, and its low light is often a place for its inhabitants to swim. They often swim in slow-moving waters. There are shades of plants on the water, and the water level is about one meter eight. The squid is very awkward. It is timid, alert and alert. It is very cautious about actions and eating. It is not easy to bite. To catch squid, you must first find the squid. The water temperature that the catfish likes is between 20-28 degrees Celsius. When the water temperature is higher than 10 degrees Celsius, it begins to eat. When it is lower than 5 degrees Celsius, it basically stops eating. In early spring, the fishing spot is mainly to watch fish stars and obstacles, that is, to make a nest next to fish stars and obstacles. In the natural environment, morning and evening are in deep water and at noon in shallow water. The water depth of the two fishing ponds is almost the same, but the difference in the fish layer, namely: sooner or later in the water, noon fish may float. The squid loves to search for food, resulting in even and dense bubbles. Even though dozens of them are caught at the same time, they often move. Afterwards, the ball is spherical and often accompanied by rising sewage. When the catfish star is found, the catfish is found. Place. Mating fish do not bite. This time is about 5O to 6O days, which is May and June in the late spring and early summer. From the beginning of July, it is the golden season of fishing for salmon. "Great heat, big fish," almost swallowed when you saw the bait.

Then there is the choice of bait. Wobs try to use finer powdered baits. If they are used, they must be soaked in early and they can be properly added to the bait. For example, particles + ultra-sensitive (fine) + Dongjun + musk squid bait or a small amount of thick bait + millet. Or nest material + Dongjun + thick fishy bait (a small amount). Hand-feeding bait can be made using simple mussel baits and brushed powder combinations. Here's an analogy to what I've used. Old Ji Yun 40+ Lao Ji Xiang 20+ Lily lure 10+10 Snowflake +15% Long Wang Hate Red Brush Powder + 3~5% San Yuan Expansion Powder Add some fish appetizers. During the production, after the bait is fully stirred and homogenized, an equal amount of water is thoroughly mixed and dispersed for 20 minutes. Simply play a few gangs into a group on it. The bait should not be overly soft and it should not be squeezed. If beginners can properly increase the proportion of brushed powder. Hand food is very simple, there are some musk bait around, add a small amount of snow and brushed powder, conditional add a little fish appetizer, the state of the fluffy out, soft and slightly elastic, flashing in the sun, you can smoothly pull out the big fries of broad beans That's it.

The last is fishing. Wads must be soaked through, minimize hard objects, minimize hard objects, Wozi hit after the release of fish, the amount should not be more, generally two fists of large dumplings can be, if the Wozi hit too much, you You can pack things up and wait for your nests tomorrow. The bait tactics can be obtained from the lectures or master videos in the station. I think that the basic problem that beginners should pay attention to is the hook. The hook of the bait is critical, and the entanglements will greatly affect the fishing effect. The buoy adjusts to half-water hook 4 to 5 to catch 3 or 2. Adjustments must be made accurately, and several adjustments must be made during fishing. Do not try to throw a full play, or need 8 minutes, pull the bait's atomization faster than the light, if the throw is too full, the fish will be concentrated in front of your fishing spot. It is possible to keep a certain frequency of fishing during fishing. The speed of throwing during this period should not be too fast. Sometimes it is necessary to wait a little for a moment. In the end, the interface is rarely seen. An average of 3 minutes will do.

HT411 Brush Cutter Parts

Ht411 Brush Cutter Parts,Brush Cutter Chain Head,Brush Cutter Carburetor Parts,Push Mower Brush Cutter

Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com