Blood cell classification counter instruction manual
Qi3538 blood cell classification counter
Instructions for use
1. Operating instructions:
1. Startup display:
Qi3538
CELL COUNTER
Clear
1
original
2
naive
3
Young
4
Late
5
Heterologous
6
other
Minus 1
total
Set up
7
Rod
8
Leaf
9
lymph
10
Single core
11
Acidophilus
12
Alkali
%
percentage
note:
(1) The total number of startups is automatically set to 100, and the total number can be changed by pressing the total setting key. The method is:
Press the total setting key for the first time to display the total number currently set, then press this key to add 100,
Reach the maximum 500 in turn, then press to return to 100, the cycle is 100 – 200 – 300 – 400 – 500 When the displayed total is deemed appropriate, you can press the cell key to enter the number.
(2) There is a corresponding number above each cell on the keyboard, which is designed for convenient display
The number 9 indicates that the corresponding cell is lymph.
(3) Other keys can define any cells not given.
(4) Since the digital code is displayed, each key can be redefined to meet other cells
Counting, such as counting cell stains.
(5) Meaning of English abbreviation:
NUM ----- Cell corresponding code QTY ------ Number of cells TOTAL ---- Total
% --------- Percentage PC (%) ----- Percentage
2. Press the cell key to enter the count, the display is as follows:
NUM QTY TOTAL
1 1 1
When the total number reaches 100, it will beep 3 times, and when the count reaches the set total number, it will beep 5 times. Press the cell key again to display:
COUNT TOTAL = xxxx
SET TOTAL = xxxx
Press the% key to view the number and percentage of the counted cells. The display format is:
NUM QTY PC (%)
6 20 4.00%
6. When any key is pressed, a beep sounds, indicating that the key is valid; when the wrong cell key is pressed, it can be decreased by 1.
Key to subtract.
7. Although the total number is set, when the total number is not counted, press the% key and press%
After the key is pressed, the counting cannot be continued.
8. End the classification count. If you want to read the classification result, you can press the% key.
The classification result is displayed, uncounted cells are displayed as 0, you can press any cell key to view the key points
Category result.
9. To count and classify the next case, you must press the clear key to clear the result of the previous case, but the
The total number of times set is unchanged.
10. If the letters displayed on the display become dark, it means that the power supply voltage is too low, please pay attention to replacement
battery.
2. Precautions for use:
1. The machine adopts AC and DC power supply mode. Insert the output plug of the external voltage regulator to the counter
Jack, the battery power supply is disconnected, there is an external voltage regulator power supply; unplug the external voltage regulator output
The plug is battery powered. Do not pull out the output plug of the external voltage regulator frequently.
In order to avoid poor contact, the battery is not used for power supply during the normal period, please remove the battery. After use,
Turn the switch to the OFF position and unplug the 220V input plug of the external voltage regulator.
2. Squeezing, twisting, collision and unauthorized disassembly are prohibited. If there is a malfunction, please contact our company
The machine is guaranteed for one year and is maintained for life. It is caused by improper use rather than product quality problems.
If the parts are damaged, charges will be charged when repairing.
Three, rated environmental working conditions:
1. AC power supply voltage: 220v ± 10% 50hz;
Or battery-powered: 4 No. 5 (1.5V) batteries, do not place them in the opposite direction.
2. Use environment:
Temperature: 0 ～ 40 ℃; relative humidity: £ 80%;
Atmospheric pressure: 750MM high mercury
Custom Frame Adhesive,Frame Adhesive,Plastic Printing Ink A3,Metal Frame Adhesive
shaoxing gesheng wire mesh co., ltd , https://www.gscreenmesh.com