Analysis of Advantages and Disadvantages of Various Plates in Wardrobe Plates
The board is the main component of the overall wardrobe, and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. The artificial board is divided into a splint, a particle board (particle board), a fiber board, and a solid wood multi-layer board, wherein the fiber board has high density, medium density and low density.
Solid wood laminate
The solid wood multi-layer board is made of three-layer or multi-layer veneer or thin board through high-temperature and high-pressure board glue. It is a multi-layer plywood with vertical and horizontal staggered as the base material, supplemented with polymer glue, and the surface is made of high quality solid wood. Leather or technical wood is made of fabric, which is made by several processes such as cold pressing, hot pressing, sanding and curing. The solid wood multi-layer board is pressed with uniform plywood, with small deformation, high strength, good internal quality and smoothness. Good degree, and can produce 5-40mm layers of different thickness according to requirements. The multi-layer solid wood board also has the characteristics of being difficult to deform and the excellent performance of adjusting the indoor temperature and humidity. After the melamine finish, the surface of the board has a natural and real wood texture and feel, which can give consumers more choices.
Wood plastic louver
Wood plastic louver has waterproof, anti-mildew, anti-insect, antibacterial, acid and alkali resistant, cleanable, environmentally friendly, formaldehyde-free, not easy to deform, no cracking and flame retardant and self-extinguishing from fire. The surface of the wood-plastic louver is good in smoothness, no obvious defects, and the texture is obviously stronger than the MDF. Moreover, the film is adhered and has high strength, and it is not easy to foam in a sun exposure or a humid environment. However, the price is relatively expensive, the quality of the narrow sliding door is slightly lighter, and the hollow structure is not very popular.
As for the MDF louver , it is not moisture-proof, water swells, easy to mold, moist and long green hair, can not be cleaned, and formaldehyde is released. Easy to deform, not flame retardant, low price, weight suitable for sliding door, solid structure, high popularity.
Further reading : Solid wood particle board or MDF? Whole wardrobe board selection guide
Particle board
Intermediate long wood fiber + fine wood fiber on both sides, pressed into a board. Particleboard: Take the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, formed by high temperature and high pressure. The advantage is that the expansion rate is small and the stability is strong. Suitable for relatively humid environments such as kitchens. The disadvantage is that it cannot be surface-milled. The edge banding is easy to fall off (because there is a certain gap between the plates, the surface is not flat enough).
MDF
The wood is broken, the original fiber is pressed by high temperature, the surface is flat, the milling is easy, the stability is good, and the nail holding power is strong (because the MDF is a solid material, all nail holding power is greater than the particle board). Etc. It is better than particleboard in strength and hardness. But there are also shortcomings that are not resistant to blisters. The amount of expansion after being blistered is approximately 2 mm on one side. Therefore, the MDF is more suitable for a drier environment such as a wardrobe.
Extended reading : custom wardrobe board selection four major standards
Classic Bath Mat,Soft Memory Foam Bath Mat,Comfort Bathroom Mat,Machine Wash Bath Mat Kit
Shaoxing Shengxiao Cushion Goods Co.,Ltd , https://www.sxsunshinefoam.com