Plates such as "torso" wardrobe purchase can not be ignored
Wardrobe is the necessary furniture for every family. For the purchase of wardrobes, consumers who are “outsiders†may pay more attention to styles and some superficial points. For the details of the wardrobe, everyone pays little attention to it. However, these aspects have a great impact on the later use, such as the hardware of the wardrobe, the panels of the wardrobe, and so on.
Xiao Bian today specially wants to discuss the wardrobe plate, it is the main component of the overall wardrobe, just like the "body", its quality directly determines the quality of the product, consumers must not ignore this when buying of. In order to help consumers choose a good wardrobe, Xiaobian specifically sorted out some methods for discriminating the plates. Let's learn together.
Whether the board of the wardrobe is made of MDF or particleboard
If you want to know what kind of board is used in the wardrobe, the way to judge it is from the cut surface of the board. The fine fibers inside the MDF are tightly combined, and the density is large and heavy. The MDF can withstand large pressures and has a long service life; while the fine particle structure of the particle board can see small pores, the ability to withstand gravity is slightly lower than that of the fiberboard. But most of the family's clothes are not very heavy, and the kitchen is heavier. The 16MM moisture-proof board can withstand the test in the kitchen, so the 18MM particleboard in the wardrobe is no problem.
Observe the thickness of the sheet
The thickness of the board determines the service life of the cabinet. Generally, the side panels and laminates are made of 18 mm thick sheets. The back sheets are thinner, but they are 9 mm or 11 mm thick on the market. Whether it is the side panel or the back panel, the board used should be the same. When consumers buy the wardrobe, they must
Beware that individual merchants only use good materials on the side panels and laminates, but use poorer panels on the back panels that are not easily noticed by consumers. In response to this, the consumer can tap the side panel and the back panel when purchasing the wardrobe, and can quickly determine whether the same panel is based on the sound emitted.
Judging the quality of the board
The surface of the board is made of melamine finish, which does not require paint, has a fine surface, a flat structure, a hard texture, and is anti-mite and flame retardant. It is called “defect-free sheet†in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand to distinguish whether it is embossed surface or flat, embossed surface is the best; wary particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions. The material of the side panels and solid plates and laminates that are not perforated should also be carefully observed.
Identify whether the board is environmentally friendly
As long as the content of free formaldehyde in the board is ≤9mg/100g, that is, the European E1 environmental protection standard, it is not harmful to human health. Regarding the detection of formaldehyde content, consumers can open the door and pull it open. If there is a strong irritating smell, even people will cry, indicating that the formaldehyde content exceeds the standard, but this method generally cannot prove anything. Even if the general business has problems, it is also Treated by other methods, generally do not smell anything; the second is to look at the merchant's material testing certificate to see if it holds the relevant national wood-based panel quality testing center's inspection certificate.
Check sheet edge sealing and closing
The surrounding edge seal can effectively prevent moisture in the air from intruding into the interior of the board. The non-sealing surface easily absorbs moisture in the air, causing the sheet to expand, causing the wardrobe to deform and affecting the service life. Whether the corner closing technique is professional and smooth, the wardrobe that is generally not up to standard is relatively rough and easy to scratch clothes. Especially in winter and summer due to the principle of thermal expansion and contraction, inferior wardrobes can not stand the test.
Usually, the more easily we overlook, the place where the problem is most common, so in the process of purchasing, we must pay attention to these places. "Don't lose big because of small" is also the reason. I hope everyone can buy a good wardrobe and provide a dream fantasy for themselves and their families.
Hospital Bed,Medical Clinic Bed,Adult Patient Beds,Nursing Children Bed
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jiamei-medical.com