Constant temperature and humidity test box power supply installation method
The constant temperature and humidity test chamber uses operation, maintenance, and parts introduction. It is believed that the users are quite clear. This chapter talks about the installation method of the constant temperature and humidity test chamber power supply:
The wiring personnel must be professional, avoid wiring errors and input incorrect power supply to damage the machine and burn components.
First confirm whether the input power supply is re-routed in case of disconnection to avoid electric shock.
If the machine has a three-phase motor, please check whether the steering is correct when it is in contact with the power supply. If the single-phase motor has been adjusted its steering at the factory, when changing, make sure that the turning is correct and avoid affecting the machine. performance.
After the wiring is completed, make sure that the machine control appliance is not faulty and input the matching power supply. At the same time, all the electrical boxes must be covered before power-on, otherwise there will be electric shock and fire hazard.
It is not a professional who should not perform maintenance and inspection on this unit, and should perform disassembly and assembly inspection in case of power failure to avoid electric shock and fire.
Please do not remove the electric box, the electric box door, the side panel of the machine body and some safety protection devices. This method will make the machine in dangerous operation state, which is very dangerous!
The total power switch on the control panel should be operated as little as possible. When the machine is stopped, only the temperature switch and the user power switch need to be turned on and off.
All of these are installation methods for the constant temperature and humidity test chamber power supply, and it is hoped that users who use the constant temperature and humidity test chamber will be helpful.
Outdoor aluminum furniture is suit for outdoor patio usage for a long time. The material is 1.2mm , 1.5mm or 2.0mm thickness aluminum frame with powder-coated.
Secure and comfortable structure, simple design but elegance, is popular option for customer. Aluminum frame is welded and polished in meticulous style. Gently angled backs and wide arms encourage restful lounging. The industry`s best high-performing fabrics encase the thick, double-wrapped foam cushions.
· Traditional forms with a spacious, inviting scale
· Rust-resistant powder-coated aluminum frame.
· Comfortable 30 density cushion foam.
· Secure tempered glass for dining table and coffee table.
· Waterproof fabric for cushions.
Outdoor aluminum furniture with high quality and long time guaranty.
If you have any questions, please contact with us directly. Outdoor Aluminum Furniture are produced by Golden Eagle Outdoor Furniture Co.,ltd with High Quality and Good Appearance. Welcome you to visit our Factory for any inquiry, please send mail directly to us.
Aluminium Garden Furniture,Lawn Aluminium Garden Furniture,Outdoor Aluminium Garden Furniturel,Garden Aluminium Garden Furniture
Golden Eagle Outdoor Furniture Co., LTD. , https://www.geleisurefurniture.com