Plate people have to know the terminology, do you know a few?
Do your home well
Let love grow with you
With the steady development of China's economy, the process of urbanization is accelerating, the boom in real estate purchases is not diminished, and a large number of houses need to be renovated. In home decoration, the most suitable and most versatile material is the plate! However, as a plate man, how many technical terms do you know? Today, the good wife plate will bring everyone together to raise knowledge!
1 , air dry density
The volume-weight relationship after the wood is completely dried out varies according to the tree species. Generally, the water content of the wood is between 10% and 14%, and the intermediate value, that is, the wood moisture content of 12%, is the standard for drying the wood. The meaning of "dry air". The so-called air dry density refers to the weight of wood of 1 cubic centimeter when the water content of wood is 12%.
If the value is 1, it has the same specific gravity as water, and the wood will basically sink to the water; if the value is less than 1, the wood will not sink; if the value is greater than 1, the wood will quickly submerged. The concept of "submerged water" is usually referred to as the air dry density of wood is greater than or equal to 1.
Air dry density is not only a basic indicator for measuring the specific gravity of wood, but also an important indicator for measuring materials. In most cases, wood (core) has a dry density of 1 or greater, and is a high quality dark precious wood.
2 , material
The quality of wood is a combination of factors. The methods and angles of observation are different, and the aspects of the test vary. In general, the quality of the material should be investigated from the oiliness of the wood (the higher the better), the fineness of the wood structure (the finer the better), the air dry density of the wood (the bigger the better), the wood size, the color (wood), board color (the brighter the better), material diameter (wood diameter or board width, the bigger the better) and so on. 
3 , woody
Woodiness refers to the rate of deformation of wood during natural drying or after making furniture. Therefore, the smaller the wood, the better the material. But the rule of wood is: the harder the material, the better, but the harder the wood, the harder it is. For example, the high-grade ebony in Africa is very good in material, and the hardness of wood is almost the highest of all hardwoods. However, the so-called “just easy to foldâ€, the wood of this ebony is particularly large, and the wood should be manually shaped. Almost a year is not enough; if it is allowed to dry naturally, it will be difficult to dry for ten years. So balance the relationship between the two.
4 , logs
That is, pure solid wood refers to natural solid wood material that has not been reprocessed, and does not use any wood of wood-based panels. Logs Customized household products All wood products must be made of sawn timber [finished or semi-finished materials (glulam, etc.) made from logs). Wood grain and wood ray of pure solid wood (if it is usually "needle" clearly visible, more or less should have some natural enamel (wood knot, wood plaque, etc., black line, etc.) to release a piece of solid wood, whether it is a wood slab It is a wooden strip, and the grain of the two interfaces should be able to clearly see the natural connection between the longitudinal section and the cross section.
5 , solid wood
Wood for customizing home made of sawn timber and plywood [a column profile made of wood and a variety of plates (multilayer board, MDF, gray core board, particle board, etc.) made of wood.
6 , wood-based panels
Wood or other non-wood plants are used as raw materials, processed into v-shaped materials of various shapes such as veneers, shavings or fibers, and the plates are recombined by applying (or without) adhesives and other additives.
7 , veneer
Wood grain and wood rays are clear. There should also be natural flaws. Because the veneer has a certain thickness (about 0.5 mm), it encounters two adjacent interfaces when making furniture. Usually, it does not turn, but each piece is attached, so the wood grain of the two interfaces should not be connected. Leather furniture, from the appearance of solid wood furniture, the natural texture, feel and color of wood are exactly the same as solid wood furniture, but in fact the furniture mixed with solid wood and wood-based panels, namely side panels, top, bottom, shelf and other components Wood or veneer fiberboard is used for veneer, and the doors and drawers are made of solid wood.
8 , stickers
Wood grain and wood ray are clearly visible. Even imported high-grade paper can be counterfeited even with wood enamel, but it is still different from natural veneer. Sticker furniture is easy to reveal flaws at the corners. In addition, the grain paper will be directly wrapped by the two planes at a small thickness (0.08 mm), so that the wood grain of the two interfaces is usually connected to the longitudinal section.
9 , string cut surface
Chord cutting, a method of cutting wood for observing wood, generally sawing it at a vertical angle of 45 degrees with respect to the trunk, and then shaving the cut surface. The string cut surface is the easiest to observe the wood grain effect and material structure.
10 , cross section
Cross-cutting is also a method of cutting wood for observing wood. It is sawed at a vertical angle of 90 degrees with respect to the trunk and then planed for the cut surface. The cross section is convenient for observing the growth rings of the wood, the tightness of the material structure, the crystal body, the oiliness and the like.
11 , longitudinal section
Longitudinal cutting, also known as cutting, is one of the three main methods of cutting wood for the purpose of observing wood. The saw is paralleled to the trunk and then the plane is cut. The slitting of the hardwood must be carried out for the core material. The longitudinal section is convenient for observing the wood grain, wood color and fineness of the wood.
A plate brand can stand up in the market in the industry, and can pay attention to the improvement of the brand image, then the product quality is definitely beyond reproach. Consumers are willing to pay for the brand, and naturally the brand has its core competitiveness that impresses consumers.
The good wife plate uses a new high-environmental plant glue, and the environmental protection grade is up to EO standard. It belongs to the non-formaldehyde series, completely away from the harmful effects of formaldehyde, benzene and other harmful substances on the human body, while retaining the natural wood flavor, it is very suitable for home decoration.
Product categories of Home Office Desk, we have years of experience in the manufacture of furniture, home office desk, Cabinet Furniture and Storage Furniture suppliers/factory, wholesale high-quality products of Study Desk , Gaming Desk and Working Desk. We have the perfect after-sales service and technical support. We hope we can cooperate happily.
Home Office Desk,Office Desk,Executive Desk,Home Desk
Baklam , https://www.baklamhome.com