How to buy high-quality bags and bags of the production process
In our daily life, the role of the bag is more and more important, especially for women consumers, the bag is an indispensable fashion accessories. However, in the vast "package" sea, you want to pick a favorite bag really difficult, and not everyone can easily identify a high-quality bags.
However, in the handbag industry, there are many quality requirements are universal! If consumers understand the requirements of these processes and quality standards, no doubt buy their own bags of great benefit! To an ordinary backpack, for example, to see how we ask for quality!
1, license plate Aberdeen: Under normal circumstances at the bottom of the licensing Aberdeen, when the needle to re-3-4 needle line, the line an inch 8-9 need to line smooth, smooth, uniform mouth, can not be skewed. Users can observe the traces of the bag around the trademark to find the problem!
2, pull the bone: only to the mouth to be uniform, the corner can not be wrinkled, uniform corners, pack the bone to be close to the heart, can not appear broken bone phenomenon.
3, pre-installed bag: must cover the front pinhole, in the head circumference or the bottom of the needle, out of the bag to be parallel to the corners, left and right symmetry.
4, the chain: only need to be unified, even, pay special attention to the zipper direction. Car out of the chain posted to be flat, can not wave.
5, barging range: to be aligned uh car, zipper can not burst open, double line between the uniform, straight. Barge effect will directly affect the quality of buried bag. Wai around too long or too short will cause the bag buried crooked or wrinkled, in principle, dark lines before trying burial bag, suitable for production.
6, the car Velcro: car line to the uniform Crochet, flash, up and down parallel, can not be skewed.
7, double-return package edge: package edge can not have large edge, discount, puncture phenomenon, the corner should be smooth.
8, cover the head: the needle car, to balance, can not be skewed, the line should be straight, even mouth.
9, side bags installed: pay attention to the direction of the first pull, buried zipper, the slider in the front direction, out of the bag to the square Founder, up and down parallel.
10, the car straps: pay special attention to the square card and the center line, under normal circumstances the four-card length of 1.5 inches, points to go through the intersection of the centerline, can not be bent, square cards on both sides of the edge of the fold should be uniform uniform, and finally close the needle to coincide.
11. Car Triangle Ribbon: Under normal circumstances, do not hit the ribbon card, into the triangular material within half an inch, to fight the party card ribbon, into the 1-inch triangular material.
As long as you master some of the above basic points, I believe go buy the bag can easily pick high-quality style.
Source: Guoxin tomorrow a & i bags