9860 Touch Dry® High Speed ​​Continuous Coder

The Marken 9860 Contact Ink Marker is driven by a DC motor and can be used in continuous packaging coders. The compact 9860 can be flexibly mounted on most continuous or intermittent vertical or horizontal packaging machines. The 9860 is designed to print dates and batches on a variety of packaging films or labels. The printable area can be up to 38,1 mm x 47,7 mm (1.5" x 1.88") and print speeds of up to 900 packs/minute. That is, when the dry ink reaches the speed of up to 152 m/min, it can still dry immediately when the package is touched. The 9860 is designed to meet European and North American safety standards.

Unique mounting brackets make matching easier. The mounting bracket of Marken makes the installation of the 9860 very simple and does not require expensive, sophisticated mounting hardware. The bracket allows you to easily set the print position. The bracket can also help you minimize the need to change the orientation of the packaging film and also make it easier for the packaging film to pass through. The 9800 series coder is the third-generation ink coder with a global installed capacity of more than 40,000.

With a minimum of downtime, the cost per line is $0.22 per thousand. Nothing to miss, the print direction is easy to change. No ribbons, no ribbon breaks. The replacement of fonts and ink wheels takes only a few seconds. Provides two kinds of brackets

Easy to install, set up and operate. Quick mounting brackets simplify the installation process without the need for complicated setup procedures. Once installed, just replace the ink wheel and font. The 9860 coder does not require any power from the main packaging machine (eg chains, belts, gears)

Easy maintenance and service system status and diagnostic information are displayed on the LCD window for easy continuous monitoring and diagnostics

The low cost of printing 9860 coder does not require routine maintenance. The design is based on 24 hours a day, 7 days a week.

The 9860 coder has clear, easy-to-read, dry printing on most common paper materials and packaging materials. The replacement of characters and ink wheels takes only a few seconds without tools and it is not as dirty as a wet ink wheel and needs cleaning.
That is, dry ink is a hot melt mixture. At room temperature, the ink wheel is hard and dry, and it is very clean. They will not splatter and make a mess. That is, dry ink is non-toxic and solvent-free. Simple and reliable, your Markon ink coder can help you print thousands of products without any problems while saving your maintenance costs.