Secondary molding plastic hose production equipment and technology
2018-06-14 14:02:25
The main purpose of packaging is to protect and preserve the product, beautify the appearance of the product and increase the value of the product. Due to the improvement of the quality of life and the change of lifestyle, people pay more and more attention to packaging.
The secondarily formed plastic hose is an advanced packaging container, because its product has a glossy surface, uniform wall thickness, and has the best performance in terms of printing and glazing, and is generally unmatched by blow-molded plastic tubes.
The packaging containers used in cosmetics, food, medicine, detergents, and other daily chemicals can highlight the value of the products. Therefore, in recent years, the Chinese market has developed rapidly.
Taiwei Automatic Machinery Co., Ltd. is the first manufacturer in Taiwan to manufacture equipment for secondary molding plastic hoses. From 1985, the first set of hose plant equipment to the factory today, with more than ten years of experience, continuous research. Improvements have been confirmed by domestic and foreign manufacturers, including Taiwan, Indonesia, Pakistan, India, Turkey, Vietnam, Bangladesh, the United States, the United Kingdom, Finland, Iran, Thailand, and China.
Taiwei Company has more than 10 years of technical experience and actively introduces new technologies from abroad, making the company a leader in the related machine manufacturing industry. The company adheres to the principle of "only customer satisfaction is the company's success" and provides customers with complete after-sales service for installation, debugging and technical training.
The advanced whole plant equipment of Taiwei Automatic Machinery Co., Ltd. is introduced as follows:
1. PE Extruder and Cutting Machine The extrusion speed of the φ50mm extruder is 7.5 meters to 10 meters per minute.
2. The diameter of the manufactured pipe is from φ16 to 50mm, which satisfies the production scope of all specifications.
3. Extrusion dies include three sizes, using the inner diameter sizing method, right angle heads, and sizing sleeves on the mandrel extension shaft. The advantage is that the inner diameter of the pipe is dimensionally stable. No stream weld line will be produced. The quality of the pipe is very good for overcoming the longitudinal cracking of the pipe.
4. High-speed vacuum shaping, using the Italian vacuum pump, the vacuum effect is stable, high speed setting and cooling are provided, and the surface of the hose is smooth and free from water marks.
5. High-speed cutting machine, using the German MSK synchronization tracking control system, the use of high-tech computer program, to achieve the synchronization of cutting and pulling speed, to ensure the stability of the hose cut quality, in order to control the error within ± 0.5mm. The cutting knife is a round knife mechanism and the cutting speed can reach 100 times per minute.
Second, vertical joint machine Φ32mm screw, closing force 55 tons, horsepower 10 horses.
2. Precision double skateboard design, accuracy of ± 0.01mm, with the positioning device for accurate and precise positioning.
3. Automatic/manual operation change system, Omron OMRON PLC programmable controller, safety protection program, reflecting the latest technology, fast operation, stable operation and fast response.
4. Automatic robots take water outlets to increase work efficiency.
5. Molding hose blowing out of the device, easy to exit the tube.
6. Wide body design, large-capacity fuel tank, to ensure the stability of the machine work.
7. Manufacturing pipe diameter P: φ16 ~ 50mm, absolutely meet the processing needs of the size of the pipe diameter. The joint speed per minute: 15 to 20 sticks/minute. Duplex operation.
Three and six-color printing machine (including glazing stems, three machine body)
1. Europe and the United States model design, speed 80 to 100 per minute.
2. The hose inlet is automatic, controlled by electric eyes, and it is easy to operate.
3. After vacuuming, there is a vacuum cleaner and brush cleaning device to clean the surface of the hose before printing, so as not to affect high-quality printing.
4. The surface treatment device can be quickly treated with gas surface treatment to achieve good results, or the traditional EDM surface treatment can be selected.
5. The ink wheel No. 1 of each ink holder rotates directly and operates independently of the motor, and has temperature control. Even in a cold climate in the north, the ink can be protected at an optimal temperature. The ink tank has a back-and-forth ink-sharing mechanism so that the ink is not even.
6. The ink-feed cylinder uses the pneumatic cylinder to send ink back and forth, and the ink can be controlled by the buttons.
7. The third ink wheel also has temperature control, and can move back and forth, in contact with the fourth ink wheel, to achieve the best ink-sharing effect.
8. No. 6 and No. 7 ink fountains use pressure control, so that the two ink wheels are in contact with the printing plate at the same time, especially for the printing of precision or screen printing, which can achieve unexpected results.
9. Quick sticker design, can remove the sticker block, changing version fast, accurate paste.
10. The printing plate wheel can be used for front, back, right, left, right and left, and can be adjusted while walking without downtime.
11. UV lamps use German products, fast drying, long life.
12. The glazing unit is designed below the machine for easy refueling, quick adjustment and easy cleaning.
13. Advancing and retiring management uses the suction method, and two retreats are carried out at the same time, then sent to the drying box, and the retreat is quick. The suction-type design does not damage the teeth of the hose and the movement is precise.
14. Three machine integrated design, combined with the connection function. Each of the three machines has its own control. When the printing part is stopped, the other parts continue to operate, and the work in the latter stage continues.
15. The light drying part of the hose can choose UV varnish with UV drying, or choose ordinary three in one varnish with hot air drying.
Fourth, automatic sealing machine Sealing diameter φ16 ~ φ50mm, hose length less than 200mm.
2. The use of electric heating 1.5KW, electric temperature using current stabilizer control.
3. Rotary heat sealing of the disc is completed once with the date.
4. Hose fixed mold 16. Speed ​​20-40 per minute.
Taiwei Automatic Machinery Co., Ltd. is headquartered in Xinzhuang, Taipei County, Taiwan. It also has an assembly plant and business representative office in Fujian Province.
Taiwei Company always upholds the concept of pursuing high quality. The company uses 10% of its operating revenue for high-tech R&D each year. Recently, it has developed a new “Hose Mouth Sealing Machine†and successfully launched it into the Chinese market. "Automatic rotary disc type joint machine", with automatic tube, joint, drilling, automatic retreat and other functions.
In the Chinese market, Taiwei’s advanced equipment manufacturers are located in Zhongshan, Shenzhen, Guangzhou, Zhaoqing, Chaoyang, Xiamen, Shanghai and Chengdu. (Zhou Qiang)
The secondarily formed plastic hose is an advanced packaging container, because its product has a glossy surface, uniform wall thickness, and has the best performance in terms of printing and glazing, and is generally unmatched by blow-molded plastic tubes.
The packaging containers used in cosmetics, food, medicine, detergents, and other daily chemicals can highlight the value of the products. Therefore, in recent years, the Chinese market has developed rapidly.
Taiwei Automatic Machinery Co., Ltd. is the first manufacturer in Taiwan to manufacture equipment for secondary molding plastic hoses. From 1985, the first set of hose plant equipment to the factory today, with more than ten years of experience, continuous research. Improvements have been confirmed by domestic and foreign manufacturers, including Taiwan, Indonesia, Pakistan, India, Turkey, Vietnam, Bangladesh, the United States, the United Kingdom, Finland, Iran, Thailand, and China.
Taiwei Company has more than 10 years of technical experience and actively introduces new technologies from abroad, making the company a leader in the related machine manufacturing industry. The company adheres to the principle of "only customer satisfaction is the company's success" and provides customers with complete after-sales service for installation, debugging and technical training.
The advanced whole plant equipment of Taiwei Automatic Machinery Co., Ltd. is introduced as follows:
1. PE Extruder and Cutting Machine The extrusion speed of the φ50mm extruder is 7.5 meters to 10 meters per minute.
2. The diameter of the manufactured pipe is from φ16 to 50mm, which satisfies the production scope of all specifications.
3. Extrusion dies include three sizes, using the inner diameter sizing method, right angle heads, and sizing sleeves on the mandrel extension shaft. The advantage is that the inner diameter of the pipe is dimensionally stable. No stream weld line will be produced. The quality of the pipe is very good for overcoming the longitudinal cracking of the pipe.
4. High-speed vacuum shaping, using the Italian vacuum pump, the vacuum effect is stable, high speed setting and cooling are provided, and the surface of the hose is smooth and free from water marks.
5. High-speed cutting machine, using the German MSK synchronization tracking control system, the use of high-tech computer program, to achieve the synchronization of cutting and pulling speed, to ensure the stability of the hose cut quality, in order to control the error within ± 0.5mm. The cutting knife is a round knife mechanism and the cutting speed can reach 100 times per minute.
Second, vertical joint machine Φ32mm screw, closing force 55 tons, horsepower 10 horses.
2. Precision double skateboard design, accuracy of ± 0.01mm, with the positioning device for accurate and precise positioning.
3. Automatic/manual operation change system, Omron OMRON PLC programmable controller, safety protection program, reflecting the latest technology, fast operation, stable operation and fast response.
4. Automatic robots take water outlets to increase work efficiency.
5. Molding hose blowing out of the device, easy to exit the tube.
6. Wide body design, large-capacity fuel tank, to ensure the stability of the machine work.
7. Manufacturing pipe diameter P: φ16 ~ 50mm, absolutely meet the processing needs of the size of the pipe diameter. The joint speed per minute: 15 to 20 sticks/minute. Duplex operation.
Three and six-color printing machine (including glazing stems, three machine body)
1. Europe and the United States model design, speed 80 to 100 per minute.
2. The hose inlet is automatic, controlled by electric eyes, and it is easy to operate.
3. After vacuuming, there is a vacuum cleaner and brush cleaning device to clean the surface of the hose before printing, so as not to affect high-quality printing.
4. The surface treatment device can be quickly treated with gas surface treatment to achieve good results, or the traditional EDM surface treatment can be selected.
5. The ink wheel No. 1 of each ink holder rotates directly and operates independently of the motor, and has temperature control. Even in a cold climate in the north, the ink can be protected at an optimal temperature. The ink tank has a back-and-forth ink-sharing mechanism so that the ink is not even.
6. The ink-feed cylinder uses the pneumatic cylinder to send ink back and forth, and the ink can be controlled by the buttons.
7. The third ink wheel also has temperature control, and can move back and forth, in contact with the fourth ink wheel, to achieve the best ink-sharing effect.
8. No. 6 and No. 7 ink fountains use pressure control, so that the two ink wheels are in contact with the printing plate at the same time, especially for the printing of precision or screen printing, which can achieve unexpected results.
9. Quick sticker design, can remove the sticker block, changing version fast, accurate paste.
10. The printing plate wheel can be used for front, back, right, left, right and left, and can be adjusted while walking without downtime.
11. UV lamps use German products, fast drying, long life.
12. The glazing unit is designed below the machine for easy refueling, quick adjustment and easy cleaning.
13. Advancing and retiring management uses the suction method, and two retreats are carried out at the same time, then sent to the drying box, and the retreat is quick. The suction-type design does not damage the teeth of the hose and the movement is precise.
14. Three machine integrated design, combined with the connection function. Each of the three machines has its own control. When the printing part is stopped, the other parts continue to operate, and the work in the latter stage continues.
15. The light drying part of the hose can choose UV varnish with UV drying, or choose ordinary three in one varnish with hot air drying.
Fourth, automatic sealing machine Sealing diameter φ16 ~ φ50mm, hose length less than 200mm.
2. The use of electric heating 1.5KW, electric temperature using current stabilizer control.
3. Rotary heat sealing of the disc is completed once with the date.
4. Hose fixed mold 16. Speed ​​20-40 per minute.
Taiwei Automatic Machinery Co., Ltd. is headquartered in Xinzhuang, Taipei County, Taiwan. It also has an assembly plant and business representative office in Fujian Province.
Taiwei Company always upholds the concept of pursuing high quality. The company uses 10% of its operating revenue for high-tech R&D each year. Recently, it has developed a new “Hose Mouth Sealing Machine†and successfully launched it into the Chinese market. "Automatic rotary disc type joint machine", with automatic tube, joint, drilling, automatic retreat and other functions.
In the Chinese market, Taiwei’s advanced equipment manufacturers are located in Zhongshan, Shenzhen, Guangzhou, Zhaoqing, Chaoyang, Xiamen, Shanghai and Chengdu. (Zhou Qiang)
Seamless Pipe,Metal Tube,Steel Tube
Vanfond Import & Export Co., Ltd. , http://www.fastubepipe.com