Antech C-300 case erector

Lantech's new C-300 headbox delivers the best reliability of these products in a 10 box/minute speed range, utilizing a patented design that squares and uprights the box throughout the process. According to Lantech, the C-300 has an absolute advantage in terms of uptime—its efficiency is so high that even loose or defective box blanks can be upright and taped, and such boxes will be on Other machines. Causes a blockage.

The C-300 has a power feed box and an automatic "on-demand box" operation. The power feed allows for a lower horizontal feeder position, which makes loading and unloading easier and operator operations more convenient. The power feed ensures continuous feed of single blanks from full to empty.

From the feeder box, an articulated lightweight crane uses a suction cup to grip the two plates of the box to make the box square. Even irregular or broken box blanks can be controlled from the beginning, and then remain square and upright. Fold sealing. The special slot in the main folder prevents lateral movement of the box when it is pushed into the exit channel. In the exit passage, the box is dragged on both sides of the double-belt passage.

The C-300 is easy to set up and adjust because of the use of a handwheel and calibration counter. The C-300 machine can handle single-walled RSC and HSC boxes, B- and C-tiles. The minimum/maximum box size is 7-7/8" long x 5-7/8" wide x 3-7/8" high and 19-5/8" long x 13-3/4" wide x 20-3/ 4" high. The machine is designed for maintenance-free, unlimited operation and has a warranty period of 3 years.